Coil Art Mage 2019 RTA Tank
CoilArt has revamped the Mage yet again with the brand new Coil Art Mage 2019 RTA. This redesigned rebuildable tank atomiser offers an improved airflow and increased e liquid capacity over its predecessors, as well as a new resin covered style. The Coil Art Mage 2019 RTA is the next step in the evolution of an already great rebuildable tank atomiser.
The new 2019 Mage RTA features a larger 25mm base diameter, allowing for increased build deck size and standard e liquid capacity. The standard glass has been modified to have a slight convex shape to increase capacity without adding excess bulk to the atomiser. The knurled metal body from the CoilArt Mage V2 has been replaced with a smooth resin drip tip, top cap, and airflow adjustment ring. The resin has been combined with a small amount of glitter, giving the finish a slight shimmer when exposed to light.
The The Coil Art Mage 2019 RTA can be broken down into four main segments. The top cap, glass tube, internal barrel, and atomiser base. The top cap consists of the a 810 resin drip tip with a colour based on the atomiser selection, has a 21mm diameter silicone ring, and can be removed from the internal barrel with a quarter turn twist. The internal barrel has a stainless steel construction and a domed shape to prevent e juice build up and has two large 9mm by 2mm top fill ports. The internal barrel’s threading allows the user to control juice flow by reducing the size of the 9mm by 3.5mm external wicking ports. The Mage 2019 Edition has four 1.5mm deep and 2.5mm wide terminal post-less build deck secured with side mounted Flathead screws and accommodates both single coil and dual coil set ups. The positive terminals are separated with PEEK insulation. The internal wicking ports measure in a 10mm by 4mm each.
The base of the build deck features twenty 1.4mm air ports in a cross pattern. This airflow leads to two fully adjustable 17mm by 3mm air slots that can be fully adjusted to the user’s preference. The resin airflow adjustment ring’s rotation is limited by a notch next to the air slot. The base of the CoilArt Mage RTA features a 510 threaded connection. The gold plated contact point is threaded and has a Flathead notch allowing it to be removed. This connection has a PEEK insulated cap that may fall when the contact point is removed. Overall, the The Coil Art Mage 2019 RTA is an upgraded version of the Mage V2 with increased airflow and improved design and is not your typical cheap rebuildable tank atomiser.
Coil Art Mage 2019 RTA Specifications:
- 25mm Stainless Steel Base Diameter
- 28mm Widest Diameter
- 55mm Overall Height
- High Capacity Tank Reservoir
- Quarter Twist Threaded Top Fill
- Smooth Top Cap
- Two Large 9mm by 2mm Fill Ports
- Stainless Steel Plated Stainless Steel Postless Build Deck
- Dual Coil Postless Build Deck
- Four Terminal
- Side Mounted Flathead Screws
- 1.5mm by 2.5mm Each Terminal
- Dual Wicking Ports
- 10mm by 4mm Build Deck Wicking Ports
- 9mm by 3.5mm External Wicking Port
- 20 x 1.4mm Honey Comb Airholes Surrounding Terminals
- PEEK Insulation
- Dual Adjustable Bottom Airslots
- 17mm by 3mm Each Airslot
- Fully Closable
- 13mm Bore Tapered Resin 810 Drip Tip
- 304 Stainless Steel and Glass Construction
- Gold Plated 510 Contact
- One Coil Art Mage 2019 RTA
- One Spare Glass Tank Section
- One 13mm Wide Tapered 810 Resin Drip Tip
- Two Spare O-Rings
- Four Spare Side Mounted Flathead Screws
- One Flathead Screwdriver
Need some more coils? Find our selection of pre-made coils here.