VooPoo Drag H40 Kit

Description

VooPoo Drag H40 Vape Kit

The VooPoo Drag H40 Kit is a modern pod kit, designed to be an easy introduction to subohm vaping.

With an internal 1500mAh battery, the H40 is the little brother to the VooPoo Drag H80s, but still containing all the features you would expect from a VooPoo Drag device.

Wattage can be set anywhere between 5w to 40w, allowing the device to be used both for subohm vaping and for mouth to lung vaping depending on the coil type you choose to use.

As the H40 uses the PnP II Pods, airflow is easily controlled by rotating the the pod left and right. The pods are fully compatible with all VooPoo PnP replacement coils which are commonly available.

VooPoo Drag H40 Features & Benefits:

• A built in 1500mAh battery provides plenty of power to get you through a full day of vaping
• 40w of maximum power output allows you to use most of the coils available in the PnP range
• OLED display shows all vital information, such as wattage, battery capacity and more
• RBA & Smart Mode allows you to customise your experience even further
• PnP pods are easy to fill and can control your airflow settings with a simple rotation
• Uses the VooPoo PnP Coil range, which is one of the most easily obtainable coils on the market

The Drag H40 is a very capable device. Due to its compatibility with PnP Coils and its wattage range, you’re in control!

If you want a tight draw, similar to smoking a cigarette, simply reduce the airflow to almost closed and use one of the PnP coils which have a resistance of 1 Ohm or more (sold separately). This configuration will give you a mouth to lung experience, the closest you can get to the experience of traditional cigarettes.

On the other hand, open the airflow up and use a lower resistance coil for a direct to lung experience. Doing this will product more vapour and give you a much more traditional vaping experience.

Two modes are built in to the system, firstly is a ‘Smart Mode’. When using this, the wattage will be automatically selected depending on the resistance of the coil installed, this is the easiest and most user friendly way to use the device, great for beginners.

Alternatively, by using the ‘RBA’ mode, you have full control over how much power you are using, allowing adjustments as low as 5w and as high as 40w.

One great thing about the H40 is that it uses the same PnP II pods as the other newer Drag kits. The pod is simple to use. The fill the pod with E Liquid, rotate the mouthpiece to reveal the fill ports. Just squeeze your bottle of juice into the fill ports and once full rotate the pod closed.

To adjust the airflow, rotate the lower portion of the pod, this will open and close the airflow control.

And finally, to remove or install a coil, lift the pod off the device and pull out or push in the coil.

When using the included subohm coils, we recommend using Higher VG E Liquids, such as shortfills, to get the best experience.

Product Specifications:

• Battery Capacity: Built-in 1500mAh
• Charging Port: USB C
• Coil Material: Mesh
• Pod E Liquid Capacity: 2ml
• Weight: 100g
• Height: 110mm
• Diameter: 27mm
• Product Origin: China

Package Contents:

• 1 x VooPoo Drag H40 Device
• 1 x VooPoo PnP Pod II
• 1 x VooPoo PnP-VM3 0.45 Ohm Coil (Pre-Installed)
• 1 x VooPoo PnP-TW30 0.3 Ohm Coil
• 1 x USB-C Cable
• 1 x User Manual

Buy the VooPoo Drag H40 Kit online at Vapour Depot.

Additional information

Colour	Black, Blue, Green, Gunmetal, Pink, Rainbow, White
Origin Country	China