Hellvape Dead Rabbit RDA
Hellvape Dead Rabbit RDA is designed by YouTuber, Vaping Heathen and has a unique top terminal four post build deck, which offers ample building space and takes the guesswork out of pre-cutting coil leads. Top side diagonal adjustable airflow focuses on flavour and minimises leaking. A gold-plated positive post, knurled grip and bottom feeding pin all contribute to an advanced vaping experience. The 24mm Dead Rabbit is a good choice for builders and squonkers alike.
Hellvape Dead Rabbit RDA Specifications:
- 24mm RDA with ample build space and generous post holes
- Slide in top coil deck takes the guesswork out of pre cutting your coil leads
- Adjustable top side diagonal airflow with a focus on flavour and to minimise leaking
- Single or dual coil configurations
- Gold plated positive post for better conductivity
- Knurled grip to adjust the airflow with ease
- Post screws fasten to the flat side of the coil lead to preserve your build
- Bottom feeding pin included for squonking
- Two 810 driptip options including a colourful resin tip and a 510 adapter
- Slotted or hex head post screw options
- Protruding 510 pin and peek insulation for hybrid top cap compatibility
- 1 x Dead Rabbit RDA
- 1 x 810 colourful resin Driptip (random colour)
- 1 x 510 adapter
- 1 x Gold BF pin
- 4 x Hex screws
- 1 x Orings
- 2 x Hex screwdrivers
Disclaimer: Advanced item. Use at your own risk. Please ensure you have knowledge of ohm’s law prior to using this device.
Steam-Engine can be be used to plan coil builds, however this should only be used for planning and not taken as 100% accurate.
Always build within the amp limits of the batteries you are using.
Before firing any build on an unregulated device, it should be first tested on an ohm reader to ensure there are no shorts.
Never use an atomiser which does not have a significantly protruding positive 510 pin on any hybrid mech mod .
Vapour Depot Limited cannot be held responsible for any damage to a device or persons through misuse of this device.