Ultroner Raiders Stabilised Wood Mech
Ultroner Raiders Stabilised Wood Mech: Hard hitting brass tube mechanical mod, with stabilised wood hybrid sleeve.
24mm diameter tube mech which requires one 18650 size battery (sold seperately). The main tube is covered with a sleeve made of stabilised wood and resin. Magnetic switch which come with a brass contact installed or can be changed to a copper contact (included in package).
Ultroner Raiders Stabilised Wood Mech Specifications:
- 24mm Diameter
- Brass tube
- Stabilised wood and resin hybrid interchangeable sleeve
- Magnetic switch
- Brass battery contact (installed)
- Copper battery contact (included)
- Hybrid top cap (510 connection direct to battery)
Disclaimer: Advanced item. Use at your own risk.
Please ensure you have knowledge of ohm’s law prior to using this device.
Steam-Engine can be be used to plan coil builds, however this should only be used for planning and not taken as 100% accurate.
Always build within the amp limits of the batteries you are using.
Before firing any build on an unregulated device, it should be first tested on an ohm reader to ensure there are no shorts.
Never use an atomiser which does not have a significantly protruding positive 510 pin on any hybrid mech mod .
Vapour Depot Limited cannot be held responsible for any damage to a device or persons through misuse of this device.