Aspire Puxos Kit
Introducing the new Aspire Puxos Kit. It allows for use with three different battery types, a 18650, a 20700 or a 21700. It also comes with the all-new Aspire Cleito Pro tank, which is just as flexible as it accepts coils from Cleito and Cleito Exo tanks. The Aspire Puxos Kit can be used in various modes, allowing you to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3).
Charging couldn’t be easier, just attach the supplied micro USB cable to the charging port and attach to a power supply. When you connect your Aspire Puxos mod to the charger, the screen will display a growing battery icon. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging, and the screen will remain off. The maximum charging rate is 2 amps.
The new Cleito PRO has exceptional wicking capabilities and produces flavour better than ever before thanks to the new refined Cleito PRO coil.
The Cleito PRO coil is rated at 0.5ohm and is backward compatible with the original Cleito tank and the Cleito EXO.
With an all new Top / side filling system to make life easier than ever to reload and go.
Bottom airflow has been refined for a more precise selection with a 3 point gage to increase flavour production.
Fitting or replacing the coils in the Cleito Pro couldn’t be simpler, unscrew the Delrin drip tip, remove the top section, then unscrew and remove the coil (if fitted) and screw in the new coil. Remember to let the coil stand for a few minutes to thoroughly saturate the wicking material before vaping.
WHO IS THE ASPIRE PUXOS KIT FOR? – The seasoned vaper who is looking to get more vapour from their e-cig
WHAT E-LIQUID TO USE? – Any e-liquid with a minimum VG content of 50%
FV TOP TIP… This device is compatible with 21700, 20700 batteries as well as 18650
- 1 x Puxos mod
- 1 x Cleito PRO Tank
- 2 x Cleito PRO 0.5ohm Coils
- 6 x o-rings
- 1 x 21700 Battery
- 1 x USB Cable
- 1 x 18650 Adapter
- 1 x Warranty Card
- 1 x User Manual