528 Customs Goon V1.5
528 Customs Goon V1.5: The new Goon v1.5 RDA is an upgrade from the best selling RDA of 2016, the original Goon RDA. The original designers 528 Custom and Blue Eyed Goon have now released the V1.5 so as to improve on the original design.
Change from the original:
- The internal cap is domed vs flat cut
- Cyclops airflow which allows better overall adjustment vs the holes
- Wider and thicker posts with most of the bridge removed to allow strength from bending and spinning
- 1.5mm taller screws to allow for more clamping space
- Thicker upper clamp, no gold plating
- Hex key, hex and philips/slotted screws
- Hex bottom feed/squonk pin.
528 Customs Goon V1.5 Specifications:
- Larger build space vertically and horizontally than the Goon V1
- Cyclops airflow
- Domed interior top cap for better flavour
- Half inch drip tip
- Wide Bore drip tip
- Standard 510 connection
- Gold plated brass 510 pin
- Stainless steel bridge post
- Stainless steel clamps
- Stainless clamp screws
- Hybrid compatible
- Peek insulators
- Positive and Negative bridges are easily replaceable
- Vacuumed Plated Stainless Steel
- 528 Customs Goon V1.5
- One set of allen key screws
- Allen key tool
- One set of hybrid phillips/flathead screws
- Stainless steel squonk pin
- Extra o-rings
Disclaimer: Advanced item. Use at your own risk. Please ensure you have knowledge of ohm’s law prior to using this device.
Steam-Engine can be be used to plan coil builds, however this should only be used for planning and not taken as 100% accurate.
Always build within the amp limits of the batteries you are using.
Before firing any build on an unregulated device, it should be first tested on an ohm reader to ensure there are no shorts.
Never use an atomiser which does not have a significantly protruding positive 510 pin on any hybrid mech mod .
Vapour Depot Limited cannot be held responsible for any damage to a device or persons through misuse of this device.